- DTE Chiptuning
- / 1.8 TSI 152HP PowerControl
Power
Power
Power
Torque
Torque
Torque
Fuel
Fuel
Fuel
Proven performance figures based on EWG 80/1269
The performance data was measured over several runs using different test vehicles and in accordance with standard test methods. Our MAHA dynamometers are regularly monitored and calibrated in accordance with standard expert evaluation regulations.The performance data are determined by a VdTÜV-compliant differential measurement between the serial power of the measuring vehicle and the power consumed. Performance values are standardized according to the standard valid since 1980 in conformity with EWG 80/1269. Older measuring methods that are no longer compliant with the standard (eg according to DIN 70020 or ISO 1585) show about 15% higher performance values. Slippage, which would lead to a false identity card significantly higher performance values, is not included by DTE standards.
Manufacturing tolerances and different fuel qualities may result in differences in performance figures. We recommend that you use high-quality fuels such as petrol with an octane rating of at least 98.
It’s possible to save up to 15% in fuel costs, however these savings may depend on an adapted part throttle driving style under the same conditions.
technology 4.0
Multi-Map Technology. Tuning for every sensor.
DTE have developed a multi-map tuning technology which can optimise up to five different channels, all in real time. Whether it be common rail pressure, boost pressure, turbo pressure, intake manifold pressure or air mass volume, DTE’s PowerControl is able to control them all. Even the latest generation and most technically demanding engines are effortlessly controlled, all within a multi-dimensional multi-map environment. The driver is able to select from 3 different programs: Sport, Dynamic and Efficiency.
Dual-map technologyLatest 2-channel tuning
Enter the world of professional tuning with an easy to install 2-channel tuning system. DTE’s BoostrPro uses a dual-map tuning technology, which optimises up to two different channels in real time. The result is an impressive performance improvement for all current turbo gasoline, hybrid and diesel engines. BoostrPro is able to control e.g. common rail pressure, boost pressure or air intake pressure. Even the latest generation and most technically demanding engines are optimised, all within a multi-dimensional dual-map environment. The extra power can be adjusted with 6 different power levels.
with warm-up timer
App control with warm-up timerThe next generation of smart tuning
In addition to PowerControl’s keypad, which DTE introduced in 2014, the new DTE performance of PowerControl X and RX can now also be operated from the cockpit.
- The chip tuning’s extra power can be easily switched on or off with the smartphone
- Drivers can change between various driving programs: Sport, Dynamic and Efficiency
- The app includes a configurable warm-up timer: drivers can decide how long warming up is needed before using the engine tuning
Sport instrumentation panelThe full performance at a glance
A highlight of the PowerControl app is the sport instrumentation panel, which shows the engine's relevant performance data in real time.
The highlights of DTE's sport instrumentation panel:
- Displaying of turbo pressure, rail pressure and rpm in real time
- An innovative accelerometer that measures the g-forces applying to the vehicle
- Easy changing of the driver's tuning programme
Reprogramming for vehicle changeKeep your tuning box up to date
A DTE engine tuning like PowerControl has the advantage that its installation is very easy. Furthermore, the dismantling back to stock condition is easy as well, e.g. when you change your vehicle. So, you can use your PowerControl tuning box again for your next vehicle. The reprogramming of the used tuning box for your new vehicle is free of charge 1x (PowerControl) and 2x (PowerControl X).
Reprogramming for vehicle changeKeep your tuning box up to date
A DTE engine tuning like PowerControl has the advantage that its installation is very easy. Furthermore, the dismantling back to stock condition is easy as well, e.g. when you change your vehicle. So, you can use your PowerControl tuning box again for your next vehicle. The reprogramming of the used tuning box for your new vehicle is free of charge 1x (PowerControl) and 2x (PowerControl X).
Reprogramming for vehicle changeKeep your BoostrPro up to date
BoostrPro is connected in few simple steps with only two plugs directly to the engine management sensors. Furthermore, the dismantling back to stock condition is easy as well, e.g. when you change your vehicle. So, you can use your BoostrPro tuning box again for your next vehicle. The reprogramming of the used tuning box for your new vehicle is available for 99 EUR, free of charge 1x (PowerControl) and 2x (PowerControl X).
Your configuration includes a reprogramming for 99 EUR. Please switch to PowerControl to get a one-time reprogramming for free.
3 selectable driving programs with 7 power levels eachChoose your favorite tuning setting
With DTE’s PowerControl, drivers have the option to choose their own and fully customizable driving program: Sport, Dynamic and Efficiency.
Note: The Efficiency program is only available for PowerControl X.
Sport
In Sport mode, the engine’s parameters are modified for maximum performance. The vehicle reacts more directly for a more responsive driving experience.
Dynamic
The Dynamic mode is a great all-rounder and very well balanced for long distances. The vehicle reacts more dynamically for better agility throughout the rpm range.
Efficiency (for PowerControl X only)
The Efficiency mode is focused on improving the engine’s fuel consumption. Savings of up to 15% can be achieved.
2 selectable driving programs with 7 power levels eachChoose your favorite tuning setting
With DTE’s PowerControl, drivers have the option to choose their own and fully customizable driving program: Sport, Dynamic and Efficiency.
Note: The Efficiency program is only available for PowerControl X.
Sport
In Sport mode, the engine’s parameters are modified for maximum performance. The vehicle reacts more directly for a more responsive driving experience.
Dynamic
The Dynamic mode is a great all-rounder and very well balanced for long distances. The vehicle reacts more dynamically for better agility throughout the rpm range.
Efficiency (for PowerControl X only)
The Efficiency mode is focused on improving the engine’s fuel consumption. Savings of up to 15% can be achieved.
The Efficiency mode for up to 15% better fuel consumption is not included in your configuration. Please switch to PowerControl X.
6 selectable power levelsChoose your favorite tuning setting
With DTE’s BoostrPro, drivers have the option to choose between 6 different power levels.
The powerful BoostrPro achieves a performance increase of up to 25% and comes with the latest digital 2-channel tuning technology.
Note: A full range of programs - from Efficiency to Sport - is only available for PowerControl X.
Efficiency mode for a better fuel consumptionSave up to 15% fuel
The DTE tuning box PowerControl X has a selectable efficiency mode. This eco program reduces fuel consumption by up to 15%. With an optimized torque, extra power is already available at low rpm’s. Now you can change gears sooner and drive longer in lower gears to save fuel. That's how the tuning pays off quickly.
DTE-tested increased performance, TÜV parts certificate for more than 4,000 modelsMore power with certainty
All performance upgrades are developed, produced and extensively tested by DTE in Recklinghausen. For more than 4,000 models and vehicle types, a model-specific TÜV parts certificate is also included in the scope of delivery. This means that the necessary modification approval can be carried out easily at any test center. This approval only takes a few minutes and is carried out by TÜV, DEKRA or a KÜS expert, for example.
Before purchasing, please check whether you require a TÜV parts certificate and whether a TÜV parts certificate is available for your DTE performance upgrade.
DTE-tested increased performance, TÜV parts certificate for more than 4,000 modelsMore power with certainty
All performance upgrades are developed, produced and extensively tested by DTE in Recklinghausen. For more than 4,000 models and vehicle types, a model-specific TÜV parts certificate is also included in the scope of delivery. This means that the necessary modification approval can be carried out easily at any test center. This approval only takes a few minutes and is carried out by TÜV, DEKRA or a KÜS expert, for example.
Before purchasing, please check whether you require a TÜV parts certificate and whether a TÜV parts certificate is available for your DTE performance upgrade.
DTE-tested increased performance, TÜV parts certificate for more than 4,000 modelsMore power with certainty
All performance upgrades are developed, produced and extensively tested by DTE in Recklinghausen. For more than 4,000 models and vehicle types, a model-specific TÜV parts certificate is also included in the scope of delivery. This means that the necessary modification approval can be carried out easily at any test center. This approval only takes a few minutes and is carried out by TÜV, DEKRA or a KÜS expert, for example.
Before purchasing, please check whether you require a TÜV parts certificate and whether a TÜV parts certificate is available for your DTE performance upgrade.
(upon registration)
5 years product warrantyComprehensive protection for your vehicle
We provide comprehensive and beyond-the-law guarantees that cover our products. We also provide a 30-day money back guarantee, so you can feel the product in comfort of your own vehicle.
Our satisfaction guarantee
Try our quality tuning and look forward to a completely new driving experience. Test the chiptuning system extensively and then evaluate the effects on consumption and driving characteristics - you will definitely enjoy!
Our product guarantee
In development and production, our main focus is on the longevity and durability of our tuning products. Therefore, we generally grant a 5-year manufacturer's warranty (upon registration) on the PowerControl tuning products from the date of purchase.
Further details on the provided warranty you can find here.
(upon registration)
5 years product warrantyComprehensive protection for your vehicle
We provide comprehensive and beyond-the-law guarantees that cover our products. We also provide a 30-day money back guarantee, so you can feel the product in comfort of your own vehicle.
Our satisfaction guarantee
Try our quality tuning and look forward to a completely new driving experience. Test the chiptuning system extensively and then evaluate the effects on consumption and driving characteristics - you will definitely enjoy!
Our product guarantee
In development and production, our main focus is on the longevity and durability of our tuning products. Therefore, we generally grant a 5-year manufacturer's warranty (upon registration) on the PowerControl tuning products from the date of purchase.
Further details on the provided warranty you can find here.
(upon registration)
5 years product warrantyComprehensive protection for your vehicle
We provide comprehensive and beyond-the-law guarantees that cover our products. We also provide a 30-day money back guarantee, so you can feel the product in comfort of your own vehicle.
Our satisfaction guarantee
Try our quality tuning and look forward to a completely new driving experience. Test the chiptuning system extensively and then evaluate the effects on consumption and driving characteristics - you will definitely enjoy!
Our product guarantee
IIn development and production, our main focus is on the longevity and durability of our tuning products. Therefore, we generally grant a 5-year manufacturer's warranty (upon registration) on the BoostrPro tuning products from the date of purchase.
Further details on the provided warranty you can find here.
- Functionality and Description
- Technical Details
- FAQs
- Reviews
DTE uses the latest software for extra power and torque, which is perfectly tuned for your specific vehicle. The result is an impressive boost in performance get your pulse racing. more...
Best performance values and resultsWith DTE's latest tuning-technologies
DTE does its own R&D as well as production work, due to this it remains the technology leader.
On the road performance perfection is the aim of our engineers, that’s why each vehicle gets a precise individual tune.
The end result, after all the development work is done, is a high quality product combined with DTE’s know-how and experience.
BoostrPro offers a professional 2-channel plug-and-play engine tuning system for a balanced improvement of power and torque. more...
Improved performance that excitesMore power with BoostrPro chip tuning
The new BoostrPro product line by DTE Systems offers a perfectly balanced improvement in engine performance, offering all the experience of DTE Systems in an attractive bundle. Enter the world of professional tuning with an easy to install 2-channel tuning system.
BoostrPro builds upon the unique core technologies of DTE Systems, packaging the core ingredients into one of the most professional entry-level tuning system available:
- Fully digital tuning technology based on DTE's multi-map technology
- 2-channel tuning technology for reliable extra power
- 6 selectable performance profiles with water-proof keypad
- Fully ECE-compliant
All our products are manufactured in Germany, using the OEM quality materials, and according to the highest quality standards. This ensures excellent reliability and superior product longevity. more...
Quality: Made in Germany
Our newly developing housing is reinforced fiberglass which is perfectly suitable for high heat environments.
The integrated high-performance processor works with reference variable modifications and automatic signal speed adjustments.
The rugged, 18-pin OEM quality connector plug is widely used in the automotive sector and is capable of handling very high loads.
All our products are manufactured in Germany, using the OEM quality materials, and according to the highest quality standards. This ensures excellent reliability and superior product longevity. more...
Quality: Made in Germany
Our newly developing housing is reinforced fiberglass which is perfectly suitable for high heat environments.
The integrated high-performance processor works with reference variable modifications and automatic signal speed adjustments.
The rugged, 18-pin OEM quality connector plug is widely used in the automotive sector and is capable of handling very high loads.
All DTE's products come complete with easy to follow, step by step pictorial fitting instructions, which makes installation really quick and hassle free. more...
Simple installation, great resultsReady…set…go!
The PowerControl comes with engine cabling and a step by step pictorial fitting guide.
With the vehicle specific wiring loom, the PowerControl is installed in a few easy steps. Getting the vehicle back to standard without leaving a trace is just as easy.
- Simple installation and also removable without a trace!
- Plug&Play installation, no cutting of any wires etc
- The PowerControl is pre-configured and ready for use once installed
- Optimum results for your vehicle without complicated setup procedures
With improved power and efficiency throughout the rev range, fuel consumption decreases by up to 15%. more...
More power, less consumptionSave fuel with a DTE performance upgrade
PowerControl enables a driving style with significantly lower revs, which considerably reduces consumption. Shift points can be set earlier and fuel is saved with every revolution of the crankshaft.
- Start off and shift immediately into 2nd gear
- Accelerate quickly and shift up again in good time
- Do not shift down as long as the engine is accelerating
Depending on the driving style, fuel savings of 15% are possible, so the tuning pays off quickly. The main savings potential lies in the increased torque. This is because the additional power is already available in the lower rev range and helps to adapt the driving style.
BoostrPro | PowerControl |
Series | Optimized by BoostrPro | Series | Optimized by PowerControl X | |
---|---|---|---|---|
Performance* | 152 HP | + 32 HP | 152 HP | + 39 HP |
112 kW | + 24 kW | 112 kW | + 29 kW | |
Torque* | 184 FT-LBS | + 21 FT-LBS | 184 FT-LBS | + 26 FT-LBS |
Consumption | up to -8% | up to -15% | ||
tested and approved on gauged MAHA dyno, based on standardised and independent test procedures | tested and approved on gauged MAHA dyno, based on standardised and independent test procedures |
System | Auxiliary power control unit with real-time sensor tuning | ||
---|---|---|---|
NewImproved technology of the latest chip generation with 5x more precise signal processing | |||
Channels | 2 channels | Newup to 9 channels | |
Programs | 2 programs Sport Dynamic |
3 programs Sport Dynamic Efficiency |
|
7 Performance characteristics | 2 x 7 Performance levels | 3 x 7 Performance levels | |
Control | Keypad control | Keypad control | Keypad control |
NewApp control |
Features | NewSports instrumentation panel | ||
---|---|---|---|
NewWarm-up-timer (configurable) | |||
NewMemory function | NewMemory function | ||
NewDual-map technology | NewMulti map technology 4.0 | ||
NewMulti protocol technology Analogue/SENT | |||
Adaptive Sensor System | Adaptive Sensor System | ||
Engine Protect+ | |||
Warranty | 1 years product warranty | 2 years product warranty | |
Additional service | Customization of tuning possible upon request | ||
NewUpgradeable, ready for future use | |||
Re-programming e.g. changing vehicles (99 €) | New1 x re-programming e.g. changing vehicles | New2 x re-programming e.g. changing vehicles | |
NewInterchangeable between engine technologies gasoline / diesel / hybrid analogue and SENT possible | |||
Optional Services | NewInstallation service at desired address | ||
Dynometer performance measurement on MAHA MSR 500 | |||
Customized tuning profile |
Hardware | BoostrPro system | PowerControl system | PowerControl X system |
---|---|---|---|
Digital Signal Controller / MCU | Digital Signal Controller / MCU | ||
High-precision microcontroller | NewHigh-precision microcontroller with 48 MIPS (million instructions per second) | NewHigh-precision microcontroller with 60 MIPS (million instructions per second) | |
NewSmartphone Connect Interface compatible from Android 7.0 and from iOS 10 |
|||
Specially developed for automotive applications -40°C up to +125°C/ -40°F up to 257°F |
|||
Integrated Active Power Management, optional power supply | |||
Wiring harness made by DTE with original safety plugs | |||
Software | Original DTE BoostrPro software | Original DTE PowerControl software | |
Vehicle-specific tuning profile developed and fine-tuned by DTE |
Safety Features | High-strength and heat-proof, fibre-glass reinforced housing with composite sealing against humidity and splash water according to IP67 | |
---|---|---|
Power & Current Limitation to protect connected engine components | ||
Certifications | Developed and manufactured according to management system in compliance with national and international road traffic law, certified by TÜV Austria | |
Tuned based on standardised DTE test and measuring methods | ||
Developed and manufactured by DTE in Germany |
Contents | BoostrPro module | PowerControl module | PowerControl X module |
---|---|---|---|
Engine-specific wiring loom | Engine-specific wiring loom | ||
Installation manual with engine-specific photos | |||
By-pass safety plug | By-pass safety plug | ||
Dimensions and Weight | 11.5 x 8.5 x 4 cm / 4.5 x 3.3 x 1.6 inch | 13 x 13 x 4 cm / 5 x 5 x 1.6 inch | |
142.6 g / 0.3 lbs module weight | 660 g / 1.5 lbs module weight | ||
Item Number | A075.673 | A075.687 | A075.701 |
* vehicle-specific deviations due to factory-provided tolerances and vehicle age upwards and downwards possible
The hardware of the PowerControl X is the technically most advanced additional control device on the market. The module works with the multi-map technology 4.0, which can process up to nine channels (including up to 3 digital SENT channels) in parallel. PowerControl X optimizes the parameters relevant to the fuel-air mixture and thus ensures more effective combustion. In addition to a significant increase in performance, this also leads to a reduction in specific consumption. In opposition to many competitor products, PowerControl not only has a single data set that applies to the entire rpm band, but is also able to access speed range-optimized maps through an additional reference connection. This ensures optimum performance across the entire rpm range.
Each DTE performance tuning module has three different programs which are fully adjustable1: Sport, Dynamic and Efficiency. The driver can select a program at the simple touch of a button. (Deactivation required for TÜV approval.)
No, after the harness and module have been removed, the vehicle is back to its original stock condition and the tuning system is not detectable. DTE’s PowerControl does not over-ride any engine protective functions and optimises all performance increases within the ECU’s standard working range, therefore no messages are logged in its memory.
Yes, an increase in performance needs to be registered, since the installation of an additional control system represents a structural change. Without entry thereof into the vehicles documents by means of partial inspections or individual inspection via a test report, may lead to the loss of insurance cover and the cancellation of the road traffic operating license.
The performance system is connected to some of the main engine sensors, which may include fuel injection, boost pressure sensors, rail pressure sensors (for diesel engines) and intake manifold pressure sensors (for petrol engines) as well as the camshaft’s connections. The relevant signals are assessed, optimised and then sent on to the engine which improves its performance.
No. As the tuning box is directly connected to the control circuitry of the vehicle there is no need of a separate power supply.
Yes, thanks to the engines improved efficiency, fuel consumption can be reduced by up to 15%. By changing gears earlier as well as more frequent driving in the lower rev range, fuel savings are most certainly possible.
Our performance enhancements are delivered ready-to-install. A detailed and illustrated step-by-step guide facilitates installation. Clearly labelled components and wiring also make things really easy. This makes the installation of the PowerControl really straight forward and, depending on the vehicles make and model, usually takes no longer than 30 minutes.
Yes. With the new PowerControl X you have the choice of whether you prefer to use the app to adjust the tuning or the classic way using the buttons.
Yes, you can switch from any DTE Systems app to one of our other apps with a quick tap on the display. Furthermore, as soon as you have registered for one of our apps, you can also use your access data for another app from DTE Systems.
The optimised performance and torque are always noticeable even without a smartphone connection. You would need a connection for i.e. changing programs.
Yes, the program selection and the fine adjustments are saved for the next drive after the power is switched off.
Yes, you can transfer your PowerControl to your new vehicle, with a quick reprogram of your existing module and possibly a harness change, and at a fraction of the cost of a new system. You can send it in for us take care of the conversion for you or visit our HQ and let us do the rest. Please note: The new engines technology should be compatible with that of the current systems.
Yes, please inform your insurance company about the vehicle’s performance changes. (Only in Europe)
An increase in performance may lead to the exclusion of warranty claims against the seller and any warranty claims against the manufacturer. You will receive a comprehensive guarantee package from DTE Systems. (Only in Europe, coming soon to Southern Africa)
Yes, the all-over epoxy resin coating of DTE’s high performance tuning PC boards ensures excellent durability and the best possible protection against moisture.
Under Engine Protect +, DTE introduces a brand new series of industry leading security standards. These continuously monitor engine signals and protect all the connected sensors which guards against ECU overload.
Yes, a major advantage of DTE’s current auxiliary control unit, is its compliance with the statutory and vehicle emission values. The engines combustion is improved in all operational areas which means that the fuel is used 100% efficiently. This also means that DTE can increase the performance of vehicles which aren’t fitted with diesel particle filters without any concerns. Compliance with the engines exhaust gas values is confirmed by the vehicle-specific parts certificate.
Yes, the protective functions of the engine management system are always maintained and the vehicle is fully diagnosable.
If a vehicle has been well maintained and serviced regularly, or even if it runs well but has high mileage, still makes it a perfect candidate for our performance enhancements.
No, as a manufacturer of performance enhancements, our focus is on the optimisation of motor vehicles, commercial vehicles, tractors and boats.
No, due to the fact that vehicle’s tax is determined by the engines displacement and its relevant pollutant class, which remain unchanged for all usual engines by the DTE’s performance systems, means that the vehicle remains in its relevant tax bracket. In case of your individual engine, please contact us.
Yes of course, DTE’s PowerControl can also be used on vehicles with automatic gearboxes, dual clutch transmissions (e.g., DSG), or semi-automatic (e.g., tiptronic).
No, DTE’s PowerControl optimizes the air & fuel ratio and not only the amount of fuel injected, but also the quantity thereof as well as the AFR’s (air to fuel ratio’s). This ensures a balanced air to fuel ratio throughout the entire RPM range as well as very low smoke emissions. Compliance with emission values are also certified within our parts certificates.
Yes, simply via the keypad, DTE’s PowerControl can be switched on & off as needed.
Just send us an email to meinung@dte-systems.de
We say thank you!
our customers are
very pleased with us*
our customers
recommend us
*Results from the actual customer survey
as of January 2016
We are only satisfied when you are excited. And if something is not as you like, our Service team is happy to help.
What our customers say
We are constantly receiving feedback from the independent review portal eKomi, via email, social media and our customer surveys. Get an overview on our customers' opinions on this page.
“ Very good communication with the customer. All inquiries will be answered quickly with a solution. That's service! ”
“ Good support for self-installation, system functions, better performance with low fuel consumption. ”
“ I was at the company and the installation was without problems. A test drive then showed the subjective performance boost. After a year with the box my fuel consumption has not increased (fuelbook logging). So all is well! ”
“ Product is top! It delivers what it promises! ”
“ Was very satisfied with the fast delivery, and I also was very well advised by a technician over the phone and could therefore install my components without problems in my vehicle. ”
“ My car is now great. I'm very satisfied with the tuning. The installation was easy. The delivery was the next day with me. I had a technical issue that could be resolved over the phone. I'm very satisfied with the product and the support ”
“ I now know my car barely. I never thought that it works so well. Will naturally recommend it. ”
“ I use DTE Systems products already over 7 years. Always have always received exhaustive information, regardless of which contact I have chosen, phone or mail. The products PedalBox and Chiptuning in my opinion are the best you can get on the market, the products have never let me down and do what they promise. ”
“ Expert advice, fast shipping and the quality of products (chip and pedalbox) I can judge well as a former car mechanic. I use both and the difference in acceleration dynamics and performance improvement is tremendous. The chiptuning and the pedal box harmonize together perfectly. I'll also need 1 - 1,5l less diesel. My vehicle has almost a motorsport feeling and I can not imagine driving without them. Great company! ”
“ I deliberately chose a tuning box of DTE Systems, because the increase in performance remains in a realistic magnitude and a certificate of conformity was included. The installation was relatively easy. Just as the acceptance by the TÜV. Was actually quite happy with my performance. However I lacked in some situations more pressure out from below. After installation of the box, the torque increase already in the lower speed range is appreciable. The fuel savings are in my case about 0.5l per 100km. The default setting of the box has not been altered by me. After 2000 km so far there were no problems. The shipment of DTE Systems is very fast. The service is very good, although I hardly had to use it. ”
PedalBox Throttle pedal tuning for maximum driving fun
vehicle-specific deviations possible
PedalBox
The PedalBox is installed within easy reach of the driver. Faster acceleration with zero lag, all thanks to DTE’s accelerator pedal tuning module.
The PedalBox has 3 programs: Sport, Sport Plus and City, each of which can be fine-tuned, with more than 21 settings for our customers to choose from.
The Pedalbox simply connects to plugs on the accelerator pedal and is ready for use in no time!
- Improved throttle response without delay
- Easy to use on touch of a button
- Fast installation in 3 steps
PedalBox Pro Throttle pedal tuning for maximum driving fun
vehicle-specific deviations possible
PedalBox
The PedalBox is installed within easy reach of the driver. Faster acceleration with zero lag, all thanks to DTE’s accelerator pedal tuning module.
The PedalBox has 3 programs: Sport, Sport Plus and City, each of which can be fine-tuned, with more than 21 settings for our customers to choose from.
The Pedalbox simply connects to plugs on the accelerator pedal and is ready for use in no time!
- Improved throttle response without delay
- Easy to use on touch of a button
- Fast installation in 3 steps
PedalBox Pro Throttle pedal tuning for maximum driving fun
vehicle-specific deviations possible
PedalBox
The PedalBox is installed within easy reach of the driver. Faster acceleration with zero lag, all thanks to DTE’s accelerator pedal tuning module.
The PedalBox has 3 programs: Sport, Sport Plus and City, each of which can be fine-tuned, with more than 21 settings for our customers to choose from.
The Pedalbox simply connects to plugs on the accelerator pedal and is ready for use in no time!
- Improved throttle response without delay
- Easy to use on touch of a button
- Fast installation in 3 steps
All Features and Information
DTE have developed a multi-map tuning technology which can optimise up to five different channels, all in real time. Whether it be common rail pressure, boost pressure, turbo pressure, intake manifold pressure or air mass volume, DTE’s PowerControl is able to control them all. Even the latest generation and most technically demanding engines are effortlessly controlled, all within a multi-dimensional multi-map environment. The driver is able to select from 3 different programs: Sport, Dynamic and Efficiency.
The Adaptive Sensor System scrutinizes all the relevant engine data and after detecting its respective load state, will provide more power when necessary. Should the driver demand more power, for example, when overtaking, the system will automatically switch on. If the additional power is not used, the system will gradually reduce the power, all power changes are seamless and dynamic.
Not only are the best performance yields based on engine load state but also on road speeds, that’s what DTE’s adaptive tuning technology offers, more power with less fuel usage.
This innovation allows DTE’s tuning products to learn the unique characteristics of your vehicle. During a short ‘learning’ phase, the chips memory function records the engines injection cycle data and optimises the reloaded maps accordingly. Standard vehicle tolerances are taken into account and an optimal tune is achieved – all without any complicated driver input.
A whole new range of new safety standards are introduced with DTE’s new Engine Protect+ feature. This function has the important task of continually monitoring the ECU’s signals to the engine and safeguarding them against any overloads. The protective functions of the ECU as well as air fuel ratios remain intact and within specification, ensuring complete peace of mind.
The installation of an additional control unit represents a structural change that can result in the loss of warranty and/or loss of insurance cover without registering a parts approval certificate in the vehicle documents. The represented product has not yet been certified with a part approval. Warranty claims against the seller and any warranty claims against the manufacturer may be omitted through an increase in performance via chiptuning or an additional control unit. Before usage outside Germany please inform yourself about applicable national road traffic laws which might restrict the usage to private roads, race tracks or offroad. We will be glad to provide you with detailed information.
The installation of an additional control unit represents a structural change that can result in the loss of warranty and/or loss of insurance cover without registering a parts approval certificate in the vehicle documents. The represented product has not yet been certified with a part approval. Warranty claims against the seller and any warranty claims against the manufacturer may be omitted through an increase in performance via chiptuning or an additional control unit. Before usage outside Germany please inform yourself about applicable national road traffic laws which might restrict the usage to private roads, race tracks or offroad. We will be glad to provide you with detailed information.
The installation of an additional control unit represents a structural change that can result in the loss of warranty and/or loss of insurance cover without registering a parts approval certificate in the vehicle documents. The represented product has not yet been certified with a part approval. Warranty claims against the seller and any warranty claims against the manufacturer may be omitted through an increase in performance via chiptuning or an additional control unit. Before usage outside Germany please inform yourself about applicable national road traffic laws which might restrict the usage to private roads, race tracks or offroad. We will be glad to provide you with detailed information.
PedalBoxThe perfect accelerator pedal tuning for maximum driving fun.
may vary by vehicle type
- Improved throttle response without any delay
- Simple use at your fingertips
- Quick installation in 3 steps
PedalBox ProThe perfect gaspedal tuning for maximum driving fun.
may vary by vehicle type
- Improved throttle response without delay
- Simple use at your fingertips
- Quick installation in 3 steps
PedalBox ProThe perfect gaspedal tuning for maximum driving fun.
may vary by vehicle type
- Improved throttle response without delay
- Simple use at your fingertips
- Quick installation in 3 steps